Quickfit TL2 dowels are part of our big Quickfit family that makes your cabinet assembly quick and easy. Just a simple push-in by hand is needed to insert them into the dowel hole – an operation completed in less than one second makes them one of the most consumer-friendly fittings on the market. Quickfit TL2 dowel is the fastest assembly system at the market allowing for factory pre-insertion in 8mm dowel holes, which can be done manually or using our Lama FastFit machine.
High drilling tolerances
Quickfit TL dowel helps furniture manufacturers overcome inaccurate drillings with its built-in self-adjustment feature that provides an ETHC (Edge To Hole Centre) tolerance of +/-1 mm on drilling operation. Fully tightened joint is assured even at marginal inconsistencies of drilling and problems associated with the natural movement of wood panels.
Optimal joint
Cam always locks at 2 o’clock lock, creating a smooth, firm tightening action and greater dowel pull-up for a strong and reliable joint. An expanding plastic sleeve on the dowel assures firm fixing in the dowel hole and high resistance to pull-out. Rocket fins on dowel assure precise insertion depth and allows the dowel to stay securely in place prior to assembly. The final result is an aligned and precise joint.
Superior fastening action
When the cam tightens, the dowel works in three directions: it pulls the dowel head up, it pushes the plastic body down, which causes the plastic thread to expand inside the dowel hole.
Consumer friendly
Our innovations always seek to make furniture assembly easy and reliable for a great Consumer Assembly Friendliness (CAF) score. Titus Quickfit TL5 does just that: it is the easiest dowel on the market for home assembly. It allows for manual insertion, which reduces assembly time and possibility of errors. It also allows for factory pre-insertion, which reduces cabinet assembly time even further, by no less than 50%.
Perfect for factory pre-insertion
Furniture manufacturers can pre-insert Quickfit TL, which reduces the time needed for cabinet assembly at home by 50% and reduces the possibility of errors. Pre-insertion can be done manually (carpenter, small manufacturing facility) or using Lama Fastfit machine (big manufacturing facility). Lama FastFit machine can be integrated into the existing manufacturing process.
Technical overview
|
Opening angle |
70° |
|
Hinge cup drilling depth |
11.0 mm |
|
Hinge cup drilling pattern |
45/9.5 mm, 48/6 mm |
|
Drilling diameter |
35 mm |
|
Fixing |
Screw on, EasyFix |
|
Mounting system |
3Way snap-on |
|
Door adjustment |
3 dimensional |
Download catalogue
For all the technical details please download the document below.