Quickfit TL2 dowels are some of the most consumer-friendly fittings on the market. They ensure optimal performance and perfect joint, even with inaccurate drillings.
High Drilling Tolerances
Quickfit TL dowel helps furniture manufacturers overcome inaccurate drillings with its built-in self-adjustment feature that provides an ETHC (Edge To Hole Centre) tolerance of +/-1 mm on drilling operation. Fully tightened joint is assured even at marginal inconsistencies of drilling and problems associated with the natural movement of wood panels.
Optimal Joint
Cam always locks at 2 o’clock lock, creating a smooth, firm tightening action and greater dowel pull-up for a strong and reliable joint. An expanding steel sleeve creates high resistance to torsion and dowel pull-out. Thanks to the fins on the plastic sleeve, the insertion depth is always correct and provides greater accuracy and speed of assembly.
Superior Fastening Action
When the cam tightens, the dowel works in three directions: it pulls the dowel head up, it pushes the plastic body down, which causes the plastic thread to expand.
Consumer Friendly
Our innovations always seek to make furniture assembly easy and reliable for a great Consumer Assembly Friendliness (CAF) score. Titus Quickfit TL5 does just that: it is the easiest dowel on the market for home assembly. It allows for manual insertion, which reduces assembly time and possibility of errors. It also allows for factory pre-insertion, which reduces cabinet assembly time even further, by no less than 50%.
Perfect for Factory Pre-Insertion
Furniture manufacturers can pre-insert Quickfit TL, which reduces cabinet assembly at home by 50% and reduce the possibility of errors.
Download Catalog
For all the technical details please download the document below.
Technical Overview
| Length ETHC (edge-to-hole centre): |
24mm, 28mm, 34mm |
| Hole diameter: | 8mm |
| Insertion type: | tool-free only |
| Application: | manual insertion, factory insertion |
| Cams: | Cam5000 |
| Drilling specification: | Hole diameter - face board = 8mm Drilling depth = min 12mm Hole diameter - edge board = 8mm |