High Drilling Tolerances

Quickfit TL dowel helps furniture manufacturers overcome inaccurate drillings with its built-in self-adjustment feature that provides an ETHC (Edge To Hole Centre) tolerance of +/-1 mm on drilling operation. Fully tightened joint is assured even at marginal inconsistencies of drilling and problems associated with the natural movement of wood panels.

Optimal Joint

Cam always locks at 2 o’clock lock, creating a smooth, firm tightening action and greater dowel pull-up for a strong and reliable joint. An expanding steel sleeve creates high resistance to torsion and dowel pull-out. Thanks to the fins on the plastic sleeve, the insertion depth is always correct and provides greater accuracy and speed of assembly.

Superior Fastening Action

When the cam tightens, the dowel works in three directions: it pulls the dowel head up, it pushes the plastic body down, which causes the plastic thread to expand.

Perfect for Factory Pre-Insertion

Furniture manufacturers can pre-insert Quickfit TL, which reduces cabinet assembly at home by 50% and reduce the possibility of errors.

Technical Overview

Opening angle


Hinge cup drilling depth

11.0 mm

Hinge cup drilling pattern

45/9.5 mm, 48/6 mm

Drilling diameter

35 mm


Screw on, EasyFix

Mounting system

3Way Snap-on

Door adjustment

3 dimensional

Complementary Product